Lumix L.P.Gas Stove is simple safe to use. Turn Gas Stove upsidedown fit the legs into place. Connect Gas Stove to the Gas Cylinder by fitting the free end ofrubber tube to the inlet connection nozzle. The rubber tubing should be laid in such a manner so as to avoid sharp bends. While lighting the burner first open the gas regulating valve on the cylinder. Bring a lighted match stick close to the burner which is to be lit. Then push the relevant knob and turn it in the ani-clockwise direction to the ON position. To light the burners in models with battery operated auto ignition press the ignition button and simultaneously with other hand press the burner knob and turn it in anti-clockwise direction to ON position. The burner would light up automatically on doing this at times as a result of air in the gas hose/tube the burner may not light up for the first time repeat the process. Note that the auto ignition may not work if electrodes are wet. Take adequate care to ensure that any liquids are not spilled onto the electrodes. The gas cylinder should not be tilted horizontal while in use. Take care to avoid spillage while cooking as this may result in extinguishing of flame and clogging of burner holes. Before removing a dish from the burner turn off the appropriate knob. As a safety precaution keep the main regulating valve of the cylinder closed when you are not using your gas stove.